Short answer: At Cozey, the Talus nightstand is the one that comes in under $300, starting from $270. Our Polaris nightstand starts from $325, which is $25 over that line, so it does not qualify. We have two nightstands in Canada, so the Talus is the only one of ours under $300.
A budget search is easier when you know what the price buys. Below, we set both nightstands side by side by size and height against a mattress, then say plainly what the extra $55 for the Polaris adds. Prices are the "from" prices on our Canadian product pages, and the page for each nightstand has the current figure.
On This Page
- Which Cozey nightstands cost less than $300?
- What do you get from the Talus for $270?
- How tall is the Talus compared with your mattress?
- What does the Polaris add for the extra $55?
- What does a pair of nightstands cost?
- Is there anything else under $300 to put beside the bed?
- Which nightstand under $300 should I choose?
- Our recommendation
- Explore our nightstands
Which Cozey nightstands cost less than $300?
Cozey's Talus is the only one: it starts from $270, while the Polaris starts from $325. We sell two nightstands in Canada, and the table puts them next to each other.
Which Cozey nightstands cost less than $300?
| Talus | Polaris | |
|---|---|---|
| Price | From $270 | From $325 |
| Under $300? | Yes, by $30 | No, over by $25 |
| Size (W x D x H) | 17.1 x 17.0 x 21.7 inches (43.5 x 43.5 x 55 cm) | 16.7 x 16.7 x 20.5 inches (42.5 x 42.5 x 52 cm) |
| Drawer | One drawer, on top or at the bottom | One top drawer, fixed in place |
| Power | None; cord pass-through | 3 outlets, USB-A and USB-C |
| Light | None | Remote-controlled LED light bar |
| Finishes | Oak, Walnut | Oak, Walnut |
| Assembly | Mostly tool-free, about 30 minutes | Screws, dowels and an M4 key; time not published |
Both are small and square, and both come in Oak or Walnut. For the full comparison of features, read our guide to Talus vs Polaris.
What do you get from the Talus for $270?
You get a compact square nightstand with one drawer that you can place on top or at the bottom. The drawer position is your choice when you build it, and it changes what sits at hand height.
- Drawer on top: the top is a surface with raised edges and a cord pass-through, and the open storage sits below the drawer.
- Drawer at the bottom: the open storage sits above the drawer at hand height, which suits a book, a glass or a lamp.
The Talus is ash wood veneer over MDF with a lacquer finish. It has a cord pass-through, which is an opening that keeps charging cables and lamp cords tidy. It is a cable opening, not a power source, so you still need a wall socket or a power strip within reach.
We do not list a weight capacity for the Talus on its product page, so we do not give one. Our Talus guide covers the drawer, finishes and assembly in full.
How tall is the Talus compared with your mattress?
The Talus is 21.7 inches (55 cm) high, which puts its top level with the sleeping surface of an Ara bed with our Hybrid mattress. A top level with the mattress, or a little below it, is easiest to reach from bed, as our guide to how to pick a nightstand explains.
Our Foam mattress is 10 inches (25 cm) thick and our Hybrid is 12 inches (30.5 cm). On our Ara bed, the sleeping surface sits at roughly 19.5 inches (49.5 cm) with the Foam mattress and roughly 21.7 inches (55 cm) with the Hybrid. The table subtracts those figures from each nightstand height.
How tall is the Talus compared with your mattress?
| Nightstand | Height | Against the Foam surface (19.5 inches / 49.5 cm) | Against the Hybrid surface (21.7 inches / 55 cm) |
|---|---|---|---|
| Talus | 21.7 inches (55 cm) | 2.2 inches (5.5 cm) above | Level |
| Polaris | 20.5 inches (52 cm) | 1.0 inch (2.5 cm) above | 1.2 inches (3 cm) below |
Treat these figures as estimates, because they come from the dimensions of our own bed and mattresses. Measure the floor to the top of your own mattress before you decide. Our guide to Ara bed sizes and dimensions lists the frame figures.
What does the Polaris add for the extra $55?
The Polaris adds power, light and a second kind of storage. The difference between $325 and $270 is $55, and the Polaris spends it on built-in features rather than on a larger footprint.
- Power: a charging station on the back with 3 power outlets, one USB-A port and one USB-C port. The power bar plugs into a wall socket.
- Light: a 9.8 inch (25 cm) magnetic LED light bar with 3 light qualities, 5 intensity levels and motion detection, switched by a wireless remote.
- Storage: a top drawer with an interior of about 13.7 x 11.0 x 5.5 inches (34.8 x 28 x 14 cm), plus a diagonal display panel below it that is 15.6 inches (39.5 cm) wide and 14.2 inches (36 cm) high.
- Capacity: 99 lb (45 kg) for the whole unit, and 33 lb (15 kg) for the drawer.
If you plan to charge a phone and a tablet at the bedside, the Polaris replaces a floor power strip. If you already have a socket within reach, the Talus covers the basics for $55 less. Our Polaris guide has the details.
What does a pair of nightstands cost?
Two Talus nightstands come to $540 and two Polaris nightstands to $650, before anything else on your order. The arithmetic is simple: 2 x $270 = $540 and 2 x $325 = $650.
That means a pair of Talus nightstands is $110 less than a pair of Polaris. A Talus beside one side of the bed and a Polaris beside the other is $595, which works if only one of you charges devices at night. The two are close in size, with about 1 cm between their footprints, and the height differs by 3 cm.
Two Talus nightstands add 87 cm (34.2 inches) to the headboard width of an Ara bed with a Round or Square headboard. The wall totals are 101.0 inches (256.6 cm) for a Full, 107.3 inches (272.6 cm) for a Queen and 121.1 inches (307.6 cm) for a King.
Is there anything else under $300 to put beside the bed?
Yes. Our Mensa side table starts from $95 and is a square side table, 19.7 inches (50 cm) on each side, with a tray that slides out of the top. It is a side table rather than a nightstand,.
Without the optional shelf, the Mensa side table is 16.3 inches (41.5 cm) high, with the shelf 20.1 inches (51 cm). Against a Foam surface at 19.5 inches (49.5 cm), the shelf version is 0.6 inches (1.5 cm) above and the version without it is 3.2 inches (8 cm) below. A lower top still works, and a top well above the mattress is the one to avoid. Our Mensa tables guide lists the finishes and the shelf.
Which nightstand under $300 should I choose?
Choose the Talus, because it is the only nightstand of ours that comes in under $300, and it is a good fit for a bedside with a socket within reach. Start from the height of your own mattress, then pick the drawer position.
- Hybrid mattress or a tall bed: the Talus, whose top is level with the Hybrid surface on an Ara bed.
- Foam mattress on an Ara bed: the Talus works, and its top is 2.2 inches (5.5 cm) above the surface.
- A tight budget: two Talus nightstands at $540 total.
- Charging and light built in: the Polaris, which is $25 over the $300 line.
- A simple build: the Talus, which takes about 30 minutes and is mostly tool-free.
Our recommendation
Cozey's Talus is the nightstand to choose under $300, starting from $270, and the Polaris is the one to choose only if you can go to $325 for built-in power and light. Pick Oak for a light room and Walnut for contrast, and confirm that a wall socket is within reach, since the Talus has no outlets and the Polaris power bar plugs into the wall. Measure from the floor to the top of your mattress before you order.
Explore our nightstands
Product specifications can change. Check the current dimensions on the product page before ordering.
