Skip to main content
Guides

What Size Nightstand for Your Bed? Heights and Widths Against Mattress Height

Match a nightstand to your mattress with the heights of our Ara bed, our two mattresses and our Talus and Polaris nightstands, worked out side by side.

Updated November 18, 20266-min ReadCozey Editorial
A Cozey Talus nightstand

Short answer: At Cozey, we size a nightstand by height first: its top should be level with the top of your mattress, or a little below it. On an Ara bed with our Foam mattress, the sleeping surface works out to about 19.5 inches (49.5 cm), and with our Hybrid mattress to about 21.7 inches (55 cm). Our Polaris nightstand is 20.5 inches (52 cm) high and our Talus nightstand is 21.7 inches (55 cm) high, so both land close to the top of the mattress.

Height decides whether a nightstand is easy to reach, and width decides how much wall it needs beside the bed. This page sets the numbers next to each other so you can read the difference for your own bed. Our nightstand guide covers drawers, style and floor clearance.

On This Page

  1. How high should a nightstand be compared with my mattress?
  2. Which nightstand height matches which Ara bed?
  3. What width and footprint does a nightstand need?
  4. How do I compare the two nightstands before I choose?
  5. Our recommendation
  6. Explore our bedroom range

How high should a nightstand be compared with my mattress?

A common guideline is a top level with the top of your mattress, or a little below it, so that a glass, a phone or a lamp switch is within reach while you lie down. That is general advice, not a product specification, and our side table guide gives the same rule. Measure your own bed from the floor to the top of the mattress first.

For our own bed, we can work it out from published sizes. The Ara bed frame is 14.6 inches (37 cm) tall, and the side panels stand 4.9 inches (12.5 cm) above the slats, so the slats sit about 9.6 inches (24.5 cm) from the floor. Our Foam mattress is 10 inches (25 cm) thick and our Hybrid mattress is 12 inches (30.5 cm). Ara storage frames are the same 14.6 inches (37 cm) tall. Ara Wood, sold in Canada only, is 14.0 inches (35.5 cm) tall with the same 4.9 inches (12.5 cm) between slats and side panel, so its slats sit about 9.1 inches (23 cm) from the floor.

How high should a nightstand be compared with my mattress?

BedMattressSleeping surface from the floor
Ara upholstered or storage frameFoam, 10 inches (25 cm)About 19.5 inches (49.5 cm)
Ara upholstered or storage frameHybrid, 12 inches (30.5 cm)About 21.7 inches (55 cm)
Ara Wood frame (Canada only)Foam, 10 inches (25 cm)About 18.9 inches (48 cm)
Ara Wood frame (Canada only)Hybrid, 12 inches (30.5 cm)About 21.1 inches (53.5 cm)

These are estimates from the frame and mattress sizes, so check them against your own bed.

Which nightstand height matches which Ara bed?

The table below subtracts the sleeping surface from each nightstand height. A positive number means the nightstand top sits above the mattress top, and a negative number means it sits below.

Which nightstand height matches which Ara bed?

Bed and mattressSleeping surfacePolaris, 20.5 inches (52 cm)Talus, 21.7 inches (55 cm)
Ara upholstered, Foam19.5 inches (49.5 cm)1.0 inch (2.5 cm) above2.2 inches (5.5 cm) above
Ara upholstered, Hybrid21.7 inches (55 cm)1.2 inches (3 cm) belowLevel
Ara Wood, Foam18.9 inches (48 cm)1.6 inches (4 cm) above2.8 inches (7 cm) above
Ara Wood, Hybrid21.1 inches (53.5 cm)0.6 inch (1.5 cm) below0.6 inch (1.5 cm) above

Read the table by looking for the smallest gap. The Talus lines up exactly with an upholstered Ara and our Hybrid mattress. The Polaris is closest to an upholstered Ara with the Foam mattress, and it is 0.6 inch (1.5 cm) under an Ara Wood bed with the Hybrid. The biggest gap in our own pairings is 2.8 inches (7 cm), the Talus beside an Ara Wood bed with the Foam mattress.

The Talus is reversible, with the drawer on top or at the bottom, and the overall height is the same either way. Our Talus guide shows both layouts.

What width and footprint does a nightstand need?

Both of our nightstands are square. The Talus measures 17.1 x 17.1 inches (43.5 x 43.5 cm) and the Polaris measures 16.7 x 16.7 inches (42.5 x 42.5 cm), so the Polaris is 0.4 inch (1 cm) narrower. Two Talus nightstands add 87 cm (34.3 inches) to the width of the bed, and two Polaris nightstands add 85 cm (33.5 inches).

The headboard is wider than the frame, so measure the wall from the outside edge of the headboard. With the Round or Square headboard:

What width and footprint does a nightstand need?

Ara sizeHeadboard widthWith two PolarisWith two Talus
Full66.8 inches (169.6 cm)100.2 inches (254.6 cm)101.0 inches (256.6 cm)
Queen73.1 inches (185.6 cm)106.5 inches (270.6 cm)107.3 inches (272.6 cm)
King86.9 inches (220.6 cm)120.3 inches (305.6 cm)121.1 inches (307.6 cm)

These totals place the nightstands outside the headboard with no gap, so they are the least wall you can plan for. Our Ara size guide lists the other headboard widths, and our headboard style guide compares Round, Square, Pillow and Extended. For a narrow room, see bedroom furniture for tight spaces.

How do I compare the two nightstands before I choose?

How do I compare the two nightstands before I choose?

FeaturePolarisTalus
Size (W x D x H)16.7 x 16.7 x 20.5 inches (42.5 x 42.5 x 52 cm)17.1 x 17.1 x 21.7 inches (43.5 x 43.5 x 55 cm)
FinishesOak, WalnutOak, Walnut
From price$325$270

The Polaris holds 99 lb (45 kg) as a whole unit and 33 lb (15 kg) in its drawer. The Talus takes about 30 minutes to assemble. Our nightstands page shows both.

Our recommendation

At Cozey, we suggest choosing by your mattress first, then by the wall.

  • Upholstered Ara with the Hybrid mattress: the Talus, which is level with the mattress top.
  • Upholstered Ara with the Foam mattress: the Polaris, which is 1.0 inch (2.5 cm) above the surface, the smaller of the two gaps.
  • Ara Wood with the Hybrid mattress: either one, as both sit within 0.6 inch (1.5 cm) of the surface.
  • Ara Wood with the Foam mattress: the Polaris, which is 1.6 inches (4 cm) above the surface.
  • A narrow wall: the Polaris, which saves 2 cm (0.8 inch) on a pair.
  • Not sure: measure from the floor to your mattress top, then book a free design consultation.

Explore our bedroom range

Product specifications can change. Check the current dimensions on the product page before ordering.

Frequently Asked Questions

At Cozey, we size a nightstand by height first and by wall space second. The bed size does not change the height, but it sets the wall you share. A Queen Ara with a Round or Square headboard is 73.1 inches (185.6 cm) wide, so two Talus nightstands need 107.3 inches (272.6 cm) of wall and two Polaris nightstands need 106.5 inches (270.6 cm). For height, aim for a top level with the mattress or a little below it. Our Talus is 21.7 inches (55 cm) high and our Polaris is 20.5 inches (52 cm) high.


At Cozey, our Hybrid mattress is 12 inches (30.5 cm) thick, which puts the sleeping surface of an upholstered Ara bed at about 21.7 inches (55 cm). Our Talus is 21.7 inches (55 cm) high, so it is level with that surface, and our Polaris is 20.5 inches (52 cm) high, about 1.2 inches (3 cm) below it. On an Ara Wood bed, the surface is about 21.1 inches (53.5 cm). These are estimates from published sizes, so measure your own bed from the floor to the top of the mattress.


At Cozey, our Foam mattress is 10 inches (25 cm) thick, so the sleeping surface of an upholstered Ara bed is about 19.5 inches (49.5 cm) from the floor. Our Polaris at 20.5 inches (52 cm) sits 1.0 inch (2.5 cm) above it, and our Talus at 21.7 inches (55 cm) sits 2.2 inches (5.5 cm) above it. On an Ara Wood bed the surface is about 18.9 inches (48 cm), so the gaps grow to 1.6 and 2.8 inches (4 and 7 cm).


At Cozey, we follow a common guideline that a nightstand top should be level with the mattress top or a little below it, so you can reach it lying down. That is general advice, not a specification. A top well above the mattress is the case to avoid. In our own pairings, the largest gap is 2.8 inches (7 cm), for the Talus beside an Ara Wood bed with the Foam mattress. The Talus lines up exactly with an upholstered Ara bed and the Hybrid mattress.


At Cozey, we add the nightstand widths to the headboard width, measured from the outside edge of the headboard. Our Round or Square Ara headboard is 66.8 inches (169.6 cm) wide in Full, 73.1 inches (185.6 cm) in Queen and 86.9 inches (220.6 cm) in King. Two Talus nightstands add 87 cm (34.3 inches), giving 101.0, 107.3 and 121.1 inches (256.6, 272.6 and 307.6 cm). Two Polaris nightstands add 85 cm (33.5 inches), which shaves 2 cm (0.8 inch) off each total.


At Cozey, yes. Our Polaris nightstand is 16.7 x 16.7 x 20.5 inches (42.5 x 42.5 x 52 cm) and our Talus nightstand is 17.1 x 17.1 x 21.7 inches (43.5 x 43.5 x 55 cm), so the Talus is 1.2 inches (3 cm) taller and 0.4 inch (1 cm) wider. Both come in Oak and Walnut. The Polaris starts from $325 and the Talus from $270, and the Polaris drawer holds 33 lb (15 kg). The Talus can be set with the drawer on top or at the bottom, and its height stays the same either way.

Explore Cozey's Ara Bed

Shop Ara Today